AUTOMATIC COLLAR TYPE FORM FILL & SEAL MACHINE

MODEL: FLEX – FFS-CT SD

Fully Automatic Collar Type Form Fill and Seal Machine Model : FLEX FFS CT SD is an intermittent motion machine designed for the efficient packing of the various products like Tea, Sugar, Spices, Snacks Foods, Wafers, Detergent, Henna Powder, Salt, Wrapper Candies, Cheese Biscuits etc. in center seal pouches.

The machine is controlled by PLC (programmable logic control) and has a MMI (man machine interface) with a digital display and keyboard, which makes this machine operator friendly.

Servo Drives for both laminate pulling through friction belts and sealing jaws, give the machine unsurpassed accuracy and speed of up to 120 pouches / min. (depending upon the product characteristics and filling attachment.)

The unwinding system is a motorized one, which keeps on feeding the laminate to the pouch forming tube without much pulling tension to enable the machine to form wrinkle free pouch formation.

This machine can be synchronized with various types of dozing systems like Volumetric cup Filling, Auger Filling and Weigh Filling System . This machine is suitable for a wide range of heat sealable film as a packing material such as PET/POLY, PET/MET/POLY, laminates with aluminum foil and heat sealable BOPP etc.

It is a versatile machine and the pouch width can be changed very easily by replacing the forming tube and Collar. This machine has an automatic pouch length change system thru PLC and can be adjusted from 65mm to 270mm. Changing of the pouch length does not require any change parts. All product contact parts are made up of food grade stainless steel SS-304/SS-316.

The machine needs 3 phase 440 Volts AC Power supply at 50 Hertz with a maximum power consumption of 5.5 KW.

Flex believes in providing the best quality products available in the market to meet the global need to meet International Quality Standards, such as PLC, Servo Drives etc.

The machine can be provided with various optional attachments (at an extra cost) like Nitrogen Flushing and batch-cutting device.

Output and accuracy depends on characteristics and quantity of the product to be packed, consistency in bulk density, consistent level in the hopper, maintaining of RH in packing room if the product is hygroscopic in nature.

Since continuous development is a process at FLEX and tailor made solutions are provided to the customers, some of the features shown are subjected to change without prior notice.

1. Product to be packed - Tea, Sugar, Spices, Henna, Detergent, Salt, Snacks Food, Wrapped Candies, Cheese Biscuits etc.

2. Machine - Collar type Form Fill & Seal machine(MODEL: FLEX - FFS- CT SD )

3. Control - PLC (Programmable Logic Control)

4. Temperature Controller - PID type

5. Pulling Mechanism - Servo Driven Pulling Belts

6. Unwinding System - Motorized

7. Sealing System - Servo Driven Heat Sealers

8. Roll Width - 400 mm (Max.)
   180 mm ( Min.)

9. Pouch Size - 80mm (Width) x 65mm (Repeat) [ Min. ] 190mm (Width) x 270 mm (Repeat) [ Max.]

10. Pouch Type - Centre Seal Pouch

11. Filling system - Volumetric Cup Filler / Auger Filler / Weigh Filler

12. All Product Contact parts - SS-316 / SS-304

13. Power Consumption - 5.5 KW.

14. Power Supply - 220V A.C / Single Phase / 50 Hz.

15. Compressed Air - 6 - 8 CFM @ 4-6 pressure bar

16. Speed - up to 120 Pouches / min. (Depending upon the product and quantity to be packed)
    
17. Filling Accuracy - + 2% (Volumetric Cup Filling System & Auger)
    + 1% (Load Cell Based Weigher)
    Output & Accuracy depends on following:
    Filling System
    Characteristics of product to be packed
    Quantity of product to be packed
    Consistency in Bulk density / Viscosity of the product
    Consistent level of product in machine hopper
    Maintaining RH in packing room if the product is hygroscope in nature.
    
18. Dimensions (Door Closed) - L= 2125 mm.,W=1360 mm., H = 2950 mm.
    (Door Open) - L= 2500 mm.,W=3200 mm., H = 2950 mm.
    
19. Net Weight - 1500 Kg. ( Approx.)